Production

SOP for Preparation of 2.5% w/v Caustic soda solution

The purpose of this standard Operating Procedure (SOP) is to lay down a procedure for preparation of 2.5% w/v caustic soda solution. This procedure is applicable for preparation of caustic soda solution used for cleaning of equipment and accessories in pellet section at manufacturing facility of Pharmaceutical   Industry. PROCEDURE: PREPARATION OF 2.5 % W/V CAUSTIC …

SOP for Preparation of 2.5% w/v Caustic soda solution Read More »

SOP on Visual Checking Of Pallets

The purpose of this standard Operating Procedure (SOP) is to lay down a procedure for the guidelines for checking of the pellets before Bulk packing and Capsules filling. This procedure is applicable for guidelines for checking of the pellets before Bulk packing and Capsules filling at manufacturing facility of Pharmaceutical Industry PROCEDURE: Before bulk packing …

SOP on Visual Checking Of Pallets Read More »

SOP on Procedure for the Operation of Fluidized Bed Dryer (FBD)

OBJECTIVE  : The purpose of this SOP to describe the procedure for the operation of fluidized bed dryer (FBD). SCOPE  : This SOP is applicable for operation of fluidized bed dryer located in the tablet production department at Manufacturing site.. Equipment Name               :  Fluidized Bed Dryer. Equipment ID No.               : Manufactured by                 : RESPONSIBILITY : …

SOP on Procedure for the Operation of Fluidized Bed Dryer (FBD) Read More »

SPECIFIC REQUIREMENTS FOR MANUFACTURE OF ORAL LIQUIDS

SPECIFIC REQUIREMENTS FOR MANUFACTURE OF ORAL LIQUIDS (SYRUPS, ELIXIRS, EMULSIONS, AND SUSPENSIONS) Oral Liquids are homogeneous liquid preparations, usually contains a solution, an emulsion or a suspension of one or more active ingredients in a suitable liquid base. They are prepared for oral administration either as such or after dilution. they may contain other substances …

SPECIFIC REQUIREMENTS FOR MANUFACTURE OF ORAL LIQUIDS Read More »

Specific Requirements For Manufacture of Oral Solid Dosage Forms

SPECIFIC REQUIREMENTS FOR MANUFACTURE OF ORAL SOLID DOSAGE FORMS (TABLETS AND CAPSULES) The processing of dry materials and products creates problems of dust control and cross-contamination. Special attention is, therefore, needed in the design, maintenance and use of premises and equipment in order to overcome these problems. Wherever required, enclosed dust control manufacturing systems shall …

Specific Requirements For Manufacture of Oral Solid Dosage Forms Read More »