Transport Temperature Excursion Assessment Worksheet
Contents
- Purpose and scope
- How to assess an excursion
- Excursion assessment worksheet
- Filled fictional example row
- Common mistakes
- Frequently asked questions
- Is there one temperature excursion limit for all pharmaceutical products?
- Should a shipment be automatically rejected after any excursion?
- What if a logger file has a data gap?
- How long should batch-specific excursion records be kept?
- References
- Related reading
In short: A transport temperature excursion assessment determines what happened to a product, what stability evidence applies and what quality decision is justified. This worksheet captures the shipment, logger profile, duration and available product information so an authorised quality decision can be traced. There is no universal excursion duration or temperature limit for all products; use the product’s labelled conditions and manufacturer-supported stability evidence.
Purpose and scope
WHO defines a temperature excursion for a time- and temperature-sensitive pharmaceutical product as exposure outside its prescribed storage or transport range. WHO TRS 961 Annex 9 says the manufacturer determines the storage and transport ranges from stability data and that product stability data should demonstrate the acceptable excursion time during transport. WHO’s later TRS 1025 Annex 7 gives broader good storage and distribution practices and says transport should follow the product label and manufacturer’s information.
An excursion worksheet is a record of evidence and decision-making. It does not establish a universal “safe” exposure or replace a product-specific stability assessment. A reading outside labelled conditions should be promptly reported through the applicable quality process. Keep product status clear and follow local procedures while the evidence is reviewed. WHO TRS 961 Annex 9 describes quarantine and evaluation of potentially defective incoming time- and temperature-sensitive products before transfer to saleable stock.
The assessment can use the shipment’s data logger, route and carrier records, packaging configuration, product stability information and the manufacturer or marketing authorisation holder’s written evaluation. See also temperature mapping of warehouses and stability chambers, temperature and relative humidity monitoring and the refrigerator operation and calibration SOP.
How to assess an excursion
- Protect product status. Identify affected product and batches, prevent unassessed stock from being distributed, and follow the site’s quarantine or hold procedure. Maintain appropriate storage conditions while the assessment is pending.
- Confirm the event. Record when and where the logger was started and stopped, shipment route, hand-offs, delays, alarms, packaging configuration and any other known exposure. Distinguish a confirmed excursion from a logger, clock or data problem.
- Check the measurement data. Preserve the original logger file and report. Record device ID, calibration status, sampling interval, time zone and any clock discrepancy. Review the complete profile, not just the highest or lowest point or an average. Note gaps and whether the sensor was placed as intended.
- Describe the product exposure. Record the product label conditions, lot, expiry, quantity and package configuration. Capture excursion direction, peak or minimum reading, duration, timing, number of events and any known prior exposure. Do not infer exposure to every unit from a sensor without considering its position and load.
- Obtain product-specific evidence. Check the manufacturer’s approved stability information and any excursion decision aid available for that product. If information is unclear or the exposure is outside the supported scenario, request a written assessment from the product manufacturer or marketing authorisation holder through the approved quality process.
- Assess risk and disposition. Consider the product, exposure profile, evidence strength and uncertainty. Document the rationale for the decision, its scope and any limitations. The authorised quality function should decide whether the batch remains on hold, can be distributed, needs further evaluation or must be rejected, following applicable procedures and market requirements.
- Investigate and prevent recurrence. Record the event, contributing causes, carrier or packaging issues, corrective actions and any transport route or control changes. Review trends where repeated excursions or data gaps occur.
WHO TRS 961 Annex 9 Supplement 12 describes transport user requirements that include the product’s temperature and humidity parameters, monitoring devices, acceptable device accuracy and actions such as go/no-go decisions when an excursion occurs. WHO TRS 1025 Annex 7 also calls for transport conditions to follow product labelling and manufacturer information.
Excursion assessment worksheet
Complete the form using the applicable controlled procedure. Add rows for additional logger files, routes, batches or exposure events. Keep the original data file and link it to this assessment.
| Field | Assessment entry |
|---|---|
| Event / deviation ID and date reported | |
| Product, strength, dosage form and market | |
| Batch / lot, quantity, expiry and package type | |
| Labelled storage and transport conditions | |
| Manufacturer excursion guidance or stability reference | |
| Shipper, carrier, route and shipment / consignment ID | |
| Dispatch, hand-off, arrival and discovery times with time zone | |
| Logger ID, sensor position, calibration status and file link | |
| Sampling interval, clock check and data completeness | |
| Lowest / highest reading, duration, timing and number of events | |
| Packaging configuration, condition and tamper / damage check | |
| Other available evidence and known prior exposure | |
| Product-specific stability assessment and source | |
| Risk rationale, uncertainty and affected scope | |
| Status while assessment is open | |
| Quality disposition, approver and date | |
| Cause, corrective action, owner, due date and effectiveness check |
Filled fictional example row
Fictional example only — every value, including the labelled range and local decision process, is an example in-house criterion for this hypothetical product, not a universal limit. A shipment of a fictional product with a label range of 2–8 °C arrives with a logger profile showing a brief peak at 11 °C for 75 minutes during a documented transfer delay. The receiving team maintains the affected batch on hold, confirms the logger identity and clock, preserves the complete file, checks the package and records the route timeline. The quality reviewer compares the event with written product-specific stability information supplied by the manufacturer. In this fictional case, the manufacturer’s assessment covers the recorded exposure and the authorised quality function documents a disposition with its rationale. The example does not establish a 75-minute allowance or an 11 °C limit for any real product.
The decision record should identify the evidence reviewed, the reviewer’s authority, affected batches or quantities, any conditions attached to the decision and whether follow-up action is needed. If the assessment cannot be completed because the profile is incomplete or the stability evidence does not cover the event, document the uncertainty and obtain further information before disposition.
Common mistakes
- Using a general temperature range as an excursion allowance. The label condition and the manufacturer-supported excursion evidence are different things. Do not create a universal allowance from either a common storage range or a single past event.
- Looking only at the peak. Duration, timing, direction, multiple events, sensor position, packaging and product history may affect the interpretation. Review the full trace and available context.
- Using average temperature to dismiss a spike. An average can hide a short excursion. Preserve and assess the underlying time-series data.
- Ignoring the logger’s clock and calibration. A time zone or clock offset can change which process step coincides with the exposure. Record device status and unresolved data limits.
- Releasing stock before the evaluation is complete. Follow the applicable status and disposition procedure; WHO TRS 961 Annex 9 says potentially defective incoming products should not be released until checks are satisfactorily completed.
- Treating a carrier explanation as product stability evidence. The carrier can help establish route conditions; product quality decisions must also use applicable manufacturer or stability information.
- Filing the event without a cause review. Assess whether route qualification, packaging, hand-off planning, monitoring, carrier agreement or contingency actions need improvement.
Frequently asked questions
Is there one temperature excursion limit for all pharmaceutical products?
No. WHO TRS 961 Annex 9 says storage and transport ranges are determined by the manufacturer based on stability data, and the data should demonstrate acceptable excursion time. Follow the product-specific evidence and the applicable market requirements.
Should a shipment be automatically rejected after any excursion?
Do not make an automatic decision based only on the existence of an excursion. Protect product status, evaluate the event against product-specific information and document a decision through the authorised quality process. If the evidence is insufficient, keep the product status controlled while further information is obtained.
What if a logger file has a data gap?
Document the gap, its timing and possible effect on the exposure assessment. Seek other relevant shipment records or a product-owner assessment. Do not silently fill missing values or assume that unrecorded time was within conditions.
How long should batch-specific excursion records be kept?
If the assessment is part of batch-specific GMP documentation, keep it at least 1 year after expiry of the respective product batch. EU GMP Volume 4, Chapter 4 §4.11 also requires batch documentation to be kept 5 years after Qualified Person certification when that is longer; 21 CFR 211.180(a) requires applicable production, control or distribution records to be retained at least 1 year after expiry. Follow longer or product-specific periods where they apply.
References
- World Health Organization, WHO Technical Report Series No. 961, Annex 9: Model Guidance for the Storage and Transport of Time- and Temperature-Sensitive Pharmaceutical Products, 2011, especially §§6.2, 6.3 and 8.2 and the glossary: official WHO record and official PDF.
- World Health Organization, WHO Technical Report Series No. 992, Annex 5, Supplement 12: Temperature-Controlled Transport Operations by Road and by Air, May 2015, especially §2.3.1: official PDF.
- World Health Organization, WHO Technical Report Series No. 992, Annex 5, Supplement 13: Qualification of Shipping Containers, May 2015, Glossary: official PDF.
- World Health Organization, WHO Technical Report Series No. 1025, Annex 7: Good Storage and Distribution Practices for Medical Products, 2020, especially §§18.13–18.16: official record and official PDF.
- European Commission, Guidelines of 5 November 2013 on Good Distribution Practice of Medicinal Products for Human Use, 2013/C 343/01: official EUR-Lex record.
- European Commission, EudraLex Volume 4, Chapter 4: Documentation, revision 1, effective 30 June 2011, §4.11: official PDF.
- 21 CFR Part 211, current eCFR through 6 November 2026, §211.180(a): eCFR.
Related reading
Related articles
B.Pharm Industrial Training Logbook Template
Use this B.Pharm industrial training logbook template to organise learning goals, daily observations, department exposure, skills and supervisor feedback.
Calibration Out-of-Tolerance Impact Assessment Worksheet
Use this calibration out-of-tolerance impact assessment worksheet to capture the event, affected measurements, batch review, decisions, actions and records.
Pharma HR Interview Questions for Freshers
Prepare for pharma HR interviews with fresher-focused questions, sample answer frameworks, and practical tips for discussing your training and goals.
QA Documentation Associate Skills Checklist for Freshers
Use this QA documentation associate checklist to practise document control, good documentation habits, batch records, traceability and interview examples.